How to Make a Custom Leather Steering Wheel Cover

In this blog article, Local Cash For Cars Adelaide will show you how to make a custom leather steering wheel cover using a steering wheel cover template. If you have any steering wheel covers and want to keep them safe, there is an easy way to make it so that your steering wheel cover is protected!

Throw Away Old Steering Wheel Cover

If you’re looking to give your car a new look, one of the easiest ways to do so is by changing your old steering wheel cover for a new, custom one. Leather steering wheel covers are not only stylish, but they can also help to protect your steering wheel from wear and tear.

Removing your old steering wheel cover is simple. Just slip it off of the steering wheel and discard it. Once it’s off, you can start the process of adding your new, custom leather steering wheel cover.

Obtain Supplies and Tools

You will need a few supplies and tools to make your custom leather steering wheel cover. Firstly, you will need a steering wheel cover kit, which you can purchase online or at many auto parts stores. In addition, you will need some leather working tools, including a leather punch, needles, and thread. Finally, you will need a large piece of leather to cover your steering wheel.

Must Read: Reasons Why Australia Needs Car Wreckers

Cut the Leather

Once you have gathered your supplies, it is time to begin working on your custom steering wheel cover. Start by cutting the leather to the proper size. You want the piece of leather to be large enough to cover the entire steering wheel, with extra room to spare. Use a sharp knife or scissors to cut the leather to size.

Punch Holes in the Leather

Next, use a leather punch to create holes around the edge of the leather piece. Make sure that the holes are evenly spaced and big enough to accommodate the thread you will use.

Sew the Leather Cover

Now it is time to sew the leather cover onto the steering wheel. Begin by threading a needle with a length of thread. Start at one end of the

Clean the Steering Wheel

The first step in making a custom leather steering wheel cover is to clean the steering wheel. You can do this by wiping it down with a damp cloth and then drying it off with a clean, dry towel. If any areas of the steering wheel are filthy, you can use mild soap and water to clean them. Once the steering wheel is clean, you can move on to the next step.

Rough Out the Design

The first step in making a custom leather steering wheel cover is to decide on the design. This can be done by sketching a design or finding one you like online. Once you have the procedure, you will need to transfer it to a piece of paper so you can use it as a template. Next, you will need to cut out the template to be the same size as your steering wheel. Once the template is cut out, you must trace it onto the leather. After tracing the design onto the leather, you will need to cut the leather along the traced lines.

Cut Leather to Size and Assemble to Fit Circle on Upper Side of Steering Wheel Cover

1. Begin by cutting your leather to size. You’ll want to make sure that the leather is big enough to wrap around the upper portion of your steering wheel cover.

2. Once you have the leather cut to size, it’s time to start assembling it. Begin by wrapping the leather around the upper part of the steering wheel cover.

3. Use a needle and thread to sew the leather in place. Be sure to go around the entire circumference of the steering wheel cover, so it is fully covered.

4. Trim any excess leather from the edges, and you’re done! Your new custom leather steering wheel cover is now complete.

Applegate Front Piece and Use Needle to Sew Everything Together

One of the most popular questions here at Applegate is how to make a custom leather steering wheel cover. This is a great DIY project for anyone who wants to add a little extra flair to their car, and it’s not as difficult as you might think. Here’s what you’ll need:

-A piece of leather large enough to wrap around your steering wheel (we recommend our front piece)

-A needle and thread


-A ruler or measuring tape

The first step is to measure your steering wheel and cut the leather accordingly. Once you have the leather cut to size, it’s time to start sewing it together. We recommend using a needle and thread, as it will be more durable than adhesive glue. Start by stitching the top and bottom seams together, then move on to the sides. Once everything is sewn together, your custom steering wheel cover is complete!

Apply Protectant, Buff, Coat with Protection Wax

It’s important to take care of your car’s steering wheel – after all, it’s one of the most important parts of the vehicle! An excellent way to protect your steering wheel is to cover it with a custom leather steering wheel cover. Here’s how to do it:

1. Apply a protectant to the leather. This will help ward off any dirt or grime that could damage the material.

2. Buff the leather to a shine. This step is optional but can make your steering wheel look great!

3. Coat the leather with a protective wax. This will create a barrier between the leather and any potential harm that could come it’s way.

Leave a Reply