Modern Ceramic Tiles Cladding
Correct tiling is essential to ensure the longevity of the modern ceramic tiles. The correct preparation of the substrate. As well as the choice of adhesive and sealant, suitable for the type of material to be installed. And the specific operating conditions allow the creation of durable modern ceramic tiles coatings. Therefore, it is of fundamental importance to entrust the work to qualified tile installers. And select products that comply with the most current national and international regulations.
DESTINATION OF CERAMIC TILES
The fate of the mosaic is one of the main defining parameters. The type and intensity of the load to which the ceramic tiles surface will be subjected during operation must be known even before choosing a material that must have the appropriate characteristics that can guarantee the required durability of the coating. You should also take into account the factor of possible entry of aggressive chemicals into the ceramic tiles.
MODERN CERAMIC TILES INSIDE OR OUTSIDE?
Outdoor ceramic tiles must have some essential properties: frost resistance, resistance to extreme temperatures and a non-slip surface. Therefore, preference should be given to modern ceramic tiles with a “structural” surface that is rough to the touch. When choosing tiles, there are fewer such restrictions and they can be based on advantages of modern ceramic tiles.
When choosing outdoor ceramic tiles, make sure their surface is slip resistant.
CLASSIC OR MODERN CERAMIC TILES?
Austere, romantic, modern, minimalist, elegant, trendy: whatever the prevailing style in the house, you can always find the right ceramic tiles. It is enough to visit a ceramic salon or an online multi brand ceramic tiles store, where you can always find materials that can satisfy the customer’s wishes.
CERAMIC TILES FOR FLOOR OR WALLS?
In the technologies for the production of facing materials, special attention is paid to the aesthetic and decorative function of ceramic tiles, which sometimes reaches absolute perfection. Modern ceramic tiles fulfill an equally important aesthetic function, but at the same time they must provide resistance to constant mechanical stress.
BASE OF TILES
To ensure a uniform ceramic tiles coating, the base must be mechanically strong, capable of withstanding both intentional and accidental loads on the surface during operation. At the time of installation, the support must be clean, flat, solid, dimensionally stable and free from contamination with substances that interfere with the adhesion of the ceramic tiles.
WHAT CERAMIC TILE?
When choosing modern ceramic tiles, you need to take into account their special characteristics, which must meet the intended conditions of the destination and the parameters of wear resistance throughout the service life. This also applies to the choice of thickness and format of the ceramic tiles.
The so-called “structured” surface finish minimizes the risk of slipping even when there is water on the floor.
WHAT IS THE FORMAT OF CERAMIC TILES?
Small-format ceramic tiles are ideal for traditional styles and small spaces, while large tiles are better suited for projects with a distinctly modern style. You can mix mosaics of different formats to create creative compositions. The number of tiles ordered must be 10% greater than the area to be covered.
MINIMAL OR OPEN SEWING?
The installation of glazed ceramic tiles with an open joint (whose size depends on the tile format and is determined by the specific requirements of the project) is of utmost importance for many reasons and, above all, the joints must absorb the stresses to which it may be subjected. Ceramic tile surface due to support instability or changes. coating size due to temperature fluctuations.
FORMS OF CREATIVITY
Modern ceramic tile collections are rich in a variety of formats, offering ceramic tile in different shapes and sizes. The choice of format is a serious decision for an architectural project, since the size of the ceramic tiles is a hallmark of the style of the living space.
Many series of ceramics include special products that allow the coating of stair treads, achieving a high aesthetic quality of the coating.
SHAPE AND SIZE OF CERAMIC TILES
Apart from square and rectangular formats, ceramic tiles can take other shapes, from the traditional hexagon to unusual shapes specially designed by architects and designers. There are infinite sizes of tiles. From small mosaics and classic formats of 10×10 and 20×20 cm to large ceramic tiles that reach 300×100 cm.
Ceramic skirting complements every detail of your project.
The direction of laying the tiles may seem like an insignificant detail, but in fact it is a certain stylistic device. On the floor, the tiles can be laid in a straight line, with equal seams or with an offset, or rather, “at a distance”, as well as diagonally or “herringbone”. For wall cladding, you can choose to lay horizontally or vertically with a surface finish with decorative strips and stripes to your liking.
The variety of color palettes for ceramic wall tiles allows you to create any color combination that reflects your personal taste and individual style.
Mixing different formats during installation creates a moving pattern and makes the style of the room even more attractive. Many collections include modular tile formats, specially designed for interesting multi-format designs.
Flowers, geometric motifs, varied surface textures: ceramics are prepared to reproduce the decorative style that you like the most.
A mosaic of chips of different sizes, decorated with iridescent inserts or interspersed with metals and precious stones, monochromatic or marbled plates, has become a mandatory decorative element of ceramics. To simplify the cladding of curved sections of walls and columns, the mosaic chips are glued to the mesh. Also specially cut, which makes the installation of the material surprisingly convenient.
The enduring fashion of mosaics is manifested in the form of ceramic decorative elements that accentuate the brightness of the walls and create a vivid image effect.
SEAMS BETWEEN PLATES
The tile joint is an important element in the installation of ceramic tiles. This significantly affects the overall aesthetic appearance and technical characteristics of the coating. Therefore, the choice of joint size and grout material is very important.
CONTRAST WASH OR TONE TILE
Today, the trade is widely represented by sealants and gaskets for tiles of various colors. The choice of which depends on the desire to highlight or hide the pattern of the bonding between the tiles. The seams can be rubbed to match the selected tile. Or filled with material in a contrasting color, emphasizing the color and role of the filler between tiles.
RECTIFIED AND UNEQUAL EDGES
The size of the joints depends on the edges of the ceramic tiles. Rectified edges allow tile to be laid virtually seamlessly, creating a solid surface consistent with modern interior design (minimal seam). Tiles with uneven edges require a wider joint for installation, while achieving the traditional stylistic effect.
For the filling of the tile joints, formulations that comply with the standard are used. Said aggregates must have characteristics that meet the project requirements and the anticipated operating conditions, including exposure to aggressive chemicals. Only in this case will the necessary protection of the joints against dirt, water seepage and bacterial growth be achieved.