Wet Carpet Drying Techniques for Different Sized Carpets

Natural disasters such as storm and flooding can cause a lot of damage to your housing. They can destroy your furniture or structure of the whole house. Carpets are the most common part of a home that are most affected by these disasters. If they get soaked into water, they need to be dried ASAP. Different sized carpets have to be dried in different ways to make sure they have no moisture left. But the question is, why wet carpet drying is important?

Why Wet Carpet Drying is Important?

Mold growth is a major reason why you should go for wet carpet drying at once, aside from the terrible odor that will pervade the area. You will not only damage the surface and structure of your home if you do not identify moisture and molds begin to thrive in your property; you will also expose yourself and your family to health concerns posed by these persistent molds. Molds are even more dangerous if you have children, the elderly, or family members who have respiratory difficulties. You won’t be able to claim payment from your home insurer if you still can’t solve the problem and your residence is severely harmed.

Wet Carpet Drying of a small size

If the wet carpet is the size of a bath towel, begin the drying process by sucking up the water with a vaccum. Remove as much water as possible. You can also experiment with various attachments, ranging in size from large too little, to find which ones produce the greatest results. Simply press the attachment against the carpet to seal it in place until the water is drained out of the pad. You’ll also require a wet vacuuming-capable filter. Paper filters will just crumble and clog, but sponge-like filters will work properly.

The next step is to collect some towels and extract the leftover water after the water has been extracted. Place the cloth on top of the drippings. To drive water out of the carpet pad, you can jump or walk on these towels. Rep wet towels and repeat till the towel is dry when you tread on it.

After you’ve forced most of the water out of the carpet to make it semi-dry, turn on a fan to distribute warm air evenly across the damp regions. If the underlay has been removed, simply peel the carpet back and run it over the floor and walls to dry. Dehumidifiers should be positioned such that the air flows across the carpet.

Wet Carpet Drying of a medium size

The medium category includes carpets that are smaller than 10 feet by 10 feet. Small and medium-sized carpets are cleaned in essentially the same way, with the exception that the latter requires exposing the carpet pad.

After removing as much water as possible with a vacuum, peel down the carpet to reveal the pad beneath. To do so, stand in the wettest region of the carpet. Pull the fibers upwards and backwards with your thumb and index finger. Use pliers instead if you can’t obtain a good grip. If you yank too hard, you risk ripping the carpet fibers out.

Using the vacuum and cloths, collect water from the pad once it has been successfully separated and exposed. To dry the pad, you can use heaters, blowers, or dehumidifiers. When drying the pad, be patient since it takes a long time for the water to evaporate completely.

Drying medium-sized carpets will put your patience to the test. It can take up to three days for this type of carpet to completely dry.

Drying Carpet of a large size

If your carpet covers a room of 100 square feet, it is already deemed enormous. You only have two options for carpets of this size: purchase commercial drying and extraction equipment or hire a professional wet carpet drying firm.

The sheer expanse of the carpet explains why commercial-grade water extraction equipment is required. You should also know how to clean the carpet properly to avoid odors and mold growth. Also, even if you employ high-tech cleaning equipment, large-scale carpets can take three days to dry. Aside from that, you’ll need a good supply of water to completely clean it. It can take up to two days for the pad alone to dry.

When water from a damp carpet has already soaked your plasterboard, the situation becomes even more serious. You’ll need an infrared camera or a moisture meter to see if your walls are damp because you can’t see or feel it. If they are, you must dry it as well before molds can begin to feed on it.

It’s awful to consider how a minor problem like getting your carpet wet may soon turn into a crisis that jeopardizes your health, property, and cash. As cliché as it may sound, an ounce of prevention is far better than a pound of treatment. Allow your damp carpets to dry today to avoid future health and financial consequences.

Leave a Reply